Hi there! The snow has been gone for some days now and the signs of spring are getting more and more obvious. I have a light and colorful watercolor painting I made that has a spring feeling to it. The painting is a somewhat different take on the traditional Swedish Dala horse (a wooden horse figurine from the province Dalarna,traditionally red) I usually take photos of my work process and it’s no different this time.
For this painting i used:
A pencil, for sketching
Ink pen, for the outlines
Maskingfluid, to cover the parts I didnt want to be blue
Watercolor paint, winsor and Newton, schmincke
Watercolor Paper, The Langton Prestige
I wish you all a good evening, night, morning, afternoon or day wherever you may be on this earth.
Today it’s very visible that autumn has arrived and worked its way through the trees and leaves (at least where I live). When I looked out the window only some days ago a tree was full of bright yellow leaves and today there is only a few sad leaves fighting against the wind to stay on the branches. But that is of course the way of this season and that’s why I thought it would be suiting for something related to autumn and its shades. This week it was my mother’s birthday and of course I could not resist the urge to create something handmade for her. I started to think about her present some weeks before her day and I thought that she could use some new jewelry and then I combined that with her favorite berry, physalis. By chance the berry happens to have fall colors, at least I relate this berry with this season. I decided to make this craft with FIMO, polymer clay which I thought was the best medium to use for this project.
Here is some photos of the berry I had as refernace for this project.
I began the process with finding reference photos, so I got the colors and shapes relatively correct. Then I mixed orange, red, yellow and some white clay in my pasta machine to get the right shades for my berries. For the leaves, I used different tones of green clay and then yellow, orange and white clay. Then I shaped the clay roughly and put the different colored parts on jewelry wire pins. When the clay well was on the pins I could shape, and form the clay even more with my clay modelling tools. If you don’t have any modelling tools you can take usual household things like a needle. I always use skewers of wood. So, when I found the right shape that I wanted the berries and the leaves they got a trip to the oven for 30 minutes in 110 Celsius.
When all the clay pieces had cooled down they got a painted with a coat of FIMO Gloss Varnish. I let the varnish dry until the next day and then it was time to create wire loops out of the remaining parts of the wire pins. The reason for making wire loops is so you can connect your charms to a bracelet or something similar. I connected my charms with jewelry chains which I later attached to a big wire ring that I had decorated with brown macramé. I didn’t want the charm to be to big, because it was supposed to be a necklace and therefore I got some clay pieces left over. I used the left overs to make a pair of matching earrings. The finishing touches consisted of joining all the parts together so they became whole jewelry pieces.
I am very pleased to say that my mom got very happy for her present and I got satisfied with my progress within the field of clay.
I hope you all had a nice time reading and viewing this post as well.
I wish you all a nice Saturday and a good evening, night, morning or day wherever you may be on this earth.
This weekend a long and quite testing project came to its end. For a long time, my mom wished to have a Moroccan mosaic garden table and now finally this year we decided to get one. But I also thought that I would give it a try myself. Therefore, the end of the summer I started with a mosaic table, my first ever mosaic project. At first I couldn’t decide what tiles and color combination that I would use. After a lot of research and inspiration on sites like Pinterest, an image of the table appeared in my mind. I bought small mosaic stones on sheets in various shades of green and blue. An old garden table, that was in need of a remodeling would become my guinea pig during this process. The table top is made of glass and that’s why I had to use a special multifunctional glue for outside use instead of the ordinary sealant. I also had to think about the weight of the mosaic of the tabletops material.
The first step I took with this table was to clean the surface so the glue could stick properly. I wanted to have a complex pattern and I wanted to decide the color combination of the mosaics. Therefore, I had to cut out all the stones from the sheets and then sort them in to piles according to color. I should say that only this process took a long time and if I would do it again I would not buy mosaic sheets only loose stones, at least when you are dealing with more detailed layouts.
The second step consisted of sketching the design on the glass surface. I had different round objects that I used as stencils to create circles. Before jumping into the gluing I place mosaic as outlines around every circle and then I started to glue them to the table. It was very sticky and detailed but it didn’t make it easier that I had to use gloves to protect my hands. I found that a big tweezer was very helpful when placing the mosaic in the glue. This step of the project was the most time consuming and took me maybe one week with late nights. It was important to me that all the circles were distinctive and of course some time also flew by when I tried to make this possible. I actually finished up with the gluing part some month ago but however there is a third step and you could say that it is the most crucial stage.
The third and last step was to use grout between all the spaces. I would think that it wouldn’t take that long time and that much effort but it was more work than one can expect. To fill in the spaces with grout approximately took an afternoon because you also need to polish of the grout from the mosaic stones witch can be a little tricky. Before you start putting on the grout put some masking tape to protect the table stands edges. But now two months later the table top seems to be finished maybe some extra details will be added later on but basically its done. The details that I mentioned was that I possibly want to change the color of the table stand from grey to black, but of that I’m not quite sure yet. I also decorated two folding chairs with the same mosaic, this time I kept the sheet on the back because the design is simpler than the table. The chairs are in desperate need of a new splash of paint and that is something I will do when the time is given.
I wrapped up the project this weekend and now today mom mothers real Moroccan table arrived. I compared the two tables but it’s quite hard to do so because they are to unlike for it to be a fair comparison. I like both of them but I dared to say that I adore mine a bit more.
If you see something fluffy in the pictures is my dog, he is always around when things are occuring.
List of supplies
Table (the table top does not have to be of glass)
Mosaic, tile in whatever shape or color you prefer
Mosaic tools such as Tile Nippers and Tile Cutters, then YOU WILL need PROTECTIVE GLASSES! if you want to shape or cut your tile.
Multifunctional glue that fits for your surface and purpose or sealant (depending on your surface)
Pen (for marking your design)
Sponge (for cleaning the mosaic tile from grout)
Now when I’ve been talking about the bought table I thought that i might as well have to show you a picture of it.
I hope that this post was inspiring to see and read. Now I wish you all a good day, afternoon, evening or morning wherever you may be on this earth.
Hello all you people out there! I thought that I should update my blog a little bit extra now after such a long break from blogging. When I create something if it’s in clay or some other material it’s usually a present for somebody. I like to give away handmade things because to me it feels more special than something store-bought.
So this post is about a handmade gift just like the previous two posts I submitted. This time I made something a little bit smaller, a jewelry-set, a bracelet and a matching pair of earrings. The gift is made for someone who helped me a lot with different things. That’s why I want to thank her by giving away something I hope will be special.
The bracelet consists of handmade fimo beads and bought white pearls and all of the beads of the earrings are handmade by me. The technique I used on the beads are in some places called embroidery or applique. When I first bumped into this technique I thought it looked so complicated and hard but when I well tried it my opinion changed. I will try to make a tutorial on clay embroidery/applique the next time I use the technique but I will also show you how to save clay when you are making beads. I hope that you are interested in this or maybe you have other suggestions for what you would like to see? Then please do tell me.
I did not only make the present but also the gift boxes for the jewelry. I used scrapbooking paper witch a have a whole bunch of and created small paper gift bags. Last years I made several of these bags for an advents calendar we had at home. The gift bags are very useful and can have many purposes, it’s only the imagination that sets the limitations. Maybe a tutorial for this can be appropriate when Christmas is getting closer or new year’s eve.
I wish you enjoyed Reading and viewing this post and now I hope you all have a great day, night or morning wherever you may be on this earth.
Hi once again!
This time I haven’t been away long. So today I wanted to show you all a present I made some months ago to a driving teacher. I made a model car out of fimo clay and decorated it’s sorundings with suiting things like a map and a suitcase. This clay creation was the first one I made in a really long time and it was also my biggest and most advanced clay work ever. Thereafter i just continued to work with fimo clay and as you could see in my previous post the size of the clay crafts are just getting bigger and bigger. On the license plate is the teachers name written in small letters, but i blurred it in these pictures.
Have good evening, day or morning wherever you may be on this Earth.
I did this for my friends birthday. She loves apes and because it was a birthday they had to have a party. 🙂 I made it with watercolor and ink.
Here is the decoupaged trash can that i talked about yesterday. I have spent quite some time on this project and I am very pleased with the results. I used old pages from a book and printed some vintage images. And the uses decoupage glue to glue them on.